﻿             Release Notes for McAfee(R)
           GroupShield (TM) version 7.0.2
           for Microsoft(R) Exchange 2010.
           Copyright (C) 2009 McAfee, Inc.
                 All Rights Reserved


==========================================================
Anti-virus DAT version:		5834.0000
Anti-virus Engine version:	5400.1158
Anti-spam Engine version:	2.2.0.9055
==========================================================

    Thank you for using our software. This file
    contains important information about this
    release. We recommend that you read the entire
    document.

    The attached files are provided as is, and with
    no warranty either expressed or implied as to
    their suitability for any particular use or
    purpose. McAfee, Inc. assumes no liability for
    damages incurred either directly or indirectly
    as a result of the use of these files, including
    but not limited to the loss or damage of data or
    systems, loss of business or revenue, or
    incidental damages arising from their use. Patch
    files should be applied only on the advice of
    McAfee Technical Support, and only when you are
    actually experiencing the issue being addressed
    by the Patch. Patch files should not be
    proactively applied in order to prevent
    potential product issues. You are responsible
    for reading and following all instructions for
    preparation, configuration, and installation of
    Patch files. Patch files are not a substitute or
    replacement for product Service Packs which may
    be released by McAfee, Inc. It is a violation of
    your software license agreement to distribute or
    share these files with any other person or
    entity without written permission from McAfee,
    Inc. Further, posting of McAfee Patch files to
    publicly available Internet sites is prohibited.
    McAfee, Inc. reserves the right to refuse
    distribution of Patch files to any company or
    person guilty of unlawful distribution of McAfee
    software products. Questions or issues with
    McAfee Patch files should be directed to McAfee
    Technical Support.

    IMPORTANT:
    This release notes should be used in conjunction
    with other GroupShield version 7.0 for Microsoft
    Exchange documentation. Information in this
    release notes takes precedence over information
    in other GroupShield 7.0 for Microsoft Exchange
    documentation, and all references to Exchange
    Server 2003 and Exchange Server 2007 should be
    read as Exchange Server 2010.


__________________________________________________________
WHAT'S IN THIS FILE

-   Product Features
   -   Features not supported
-   Installation and System Requirements
   -   System Requirements
   -   Standard Installation
   -   Silent Installation
   -   Cluster Installation
   -   Cluster Uninstallation
   -   Installation using ePolicy Orchestrator 4.0
   -   Installation using ePolicy Orchestrator 4.5
   -   Policy Migration using ePolicy Orchestrator 4.0
   -   Policy Migration using ePolicy Orchestrator 4.5
   -   Testing your Installation
   -   Quarantining using McAfee Quarantine Manager
   -   Removing this Installation
-   Resolved Issues
-   Known Issues
-   Documentation
-   Contact Information
-   Copyright and Trademark Attributions
-   License Information

__________________________________________________________
PRODUCT FEATURES

-   Support for Microsoft Exchange 2010
-   Integration with Anti-virus Engine version 5400
-   Integration with McAfee Agent (MA) version 4.5
-   Integration with Internet Protocol version 6 (IPv6)
-   Support on Windows 2008 Standard/Enterprise Server (64-bit)
-   All new Anti-Spam Engine version 2.2
-   24/7 Rules update for Anti-spam
-   Enhanced Reporting
   -   Status report
   -   Configuration report
    (See the User guide - Addendum for more
    information on reporting and IPv6 integration.)


FEATURES NOT SUPPORTED

-   Direct upgrade from GroupShield for Exchange
    version 7.0/7.0.1 to version 7.0.2.

__________________________________________________
INSTALLATION AND SYSTEM REQUIREMENTS

SYSTEM REQUIREMENTS

Server Operating System Supported:

-   Windows 2008 Standard/Enterprise Server SP2 (64-bit)
-   Windows 2008 Standard/Enterprise Server R2 (64-bit)

    NOTE:
    Refer Windows service pack requirements Release
    Notes for Service Pack information.

Exchange Server(s) Supported:

-   Microsoft Exchange Server 2010

    GroupShield v7.0.2 for Exchange supports the
    following Microsoft Exchange 2010 server roles:

      -  Edge Transport Server
      -  Hub Transport Server
      -  Mailbox Server
      -  Mailbox Server + Hub Transport Server

    NOTE:
    It also supports Exchange Server 2010 high
    availability solution, Database Availability
    Group (DAG).

Processor Supported:

-   Intel x64 architecture-based processor that
    supports Intel Extended Memory 64 technology
    (Intel EM64T)

-   AMD x64 architecture-based processor with AMD
    64-bit technology

Memory:

-   Minimum: 2 GB RAM
    Recommended: 4 GB RAM

Disk Space:

-   Minimum: 740 MB

Browsers Supported:

-   Microsoft Internet Explorer version 6.0 or later
-   Mozilla Firefox 2.0

_______________________________________________________
STANDARD INSTALLATION

1.  Using an administrative account, log on to the
    computer where Microsoft Exchange Server is
    installed.

2.  Create a temporary directory on the network or
    your local drive.

3.  To install, do one of the following depending on
    how you obtained the software:

   -   Insert the CD into the computer’s drive and
       copy the installation files into the
       temporary directory you created.

   -   Download the .ZIP archive and extract the
       file to the temporary directory.

4.  Using Windows Explorer, navigate to the folder
    where you copied the installation files and
    double-click SETUP.EXE.

5.  Accept the End User License agreement and click
    OK.

6.  Click Browse to select the Destination Folder or
    Next to install the software in the default
    directory.

7.  Select the features you wish to install.

8.  Click Next. The Ready to Install the Application
    dialog box appears.

9.  Select "Create Desktop Shortcut" to create a
    shortcut icon on the desktop and click ‘Next’. A
    dialog displays a progress bar indicating the
    features being copied, initialized, and
    installed.

10. Click Finish to complete the installation
    process.

11. Upon successful completion of the installation
    process, the following menu appears under Start
    | All Programs | McAfee | GroupShield for
    Exchange

   -   Cluster Replication Setup
   -   GroupShield for Exchange (Web)
   -   GroupShield for Exchange Access Control
   -   GroupShield for Exchange
   -   SiteList Editor

    NOTE:
   -   To launch the GroupShield for Exchange Web
       user interface in Edge role, install IIS role
       services - ISAPI filters and ISAPI
       extensions.

   -   Cluster Replication Setup option is available
       on ‘Mailbox’ and ‘Mailbox + Hub’ Server.


SILENT INSTALLATION

1.  Using an administrative account, log on to the
    computer where Microsoft Exchange server is
    installed.

2.  Create a temporary directory on the network or
    your local drive.

3.  To install, do one of the following depending on
    how you obtained the software:

   -   Insert the CD into the computer’s drive and
       copy the installation files into the
       temporary directory you created.

   -   Download the .ZIP archive and extract the
       file to the temporary directory.

4.  Using Windows Explorer, navigate to the folder
    where you copied the installation files and
    double-click "SILENT.BAT".

    Edit the SILENT.BAT file to do a custom
    installation. You can modify the custom
    installation folder, features, desktop shortcut
    and product update.

    You can use:

    SET INSTALL_PATH – To install GroupShield 7.0.2
    for Exchange in the specified folder location.

       EXAMPLE:
       SET INSTALL_PATH="C:\Program files(x86)\McAfee\GroupShield for Exchange"

    SET FEATURES – To install the GroupShield 7.0.2
    for Exchange Web user interface and/or
    stand-alone user interface.

       EXAMPLE:
       SET FEATURES="ServerProtection,StandaloneUI,WebUI"

    SET DESKTOP_SHORTCUT – To create a GroupShield
    7.0.2 for Exchange desktop shortcut item. You
    can use "0" or "1".

       EXAMPLE:
       SET DESKTOP_SHORTCUT=0

    SET RUNUPDATENOW – To immediately update the
    GroupShield 7.0.2 for Exchange software. You can
    use "Yes" or "No"

       EXAMPLE:
       SET RUNUPDATENOW=No

    NOTE:
    To install McAfee Anti-Spam add-on component,
    double-click "GSHASE.EXE" in the "AntiSpam"
    folder.

    To install the "McAfee Anti-Spam Rules Updater"
    service manually:

   a.  Log on to the GroupShield server as an
       administrator.

   b.  From the command prompt, go to "/GroupShield
       for Exchange/bin" folder.

   c.  Execute the following command:

       MaesRulesUpdater -i

5.  Upon successful completion of the installation
    process, the following menu appears under Start
    | All Programs | McAfee | GroupShield for
    Exchange:

   -   Cluster Replication Setup
   -   GroupShield for Exchange Access Control
   -   GroupShield for Exchange
   -   SiteList Editor

    NOTE:
   -   From the Services console, manually start the
       service "McAfee Anti-spam Rules Updater".

   -   Cluster Replication Setup option is available
       on ‘Mailbox’ and ‘Mailbox + Hub’ Server.


CLUSTER INSTALLATION

DATABASE AVAILABILITY GROUP (DAG) ON EXCHANGE 2010

Follow the steps mentioned in the "STANDARD
INSTALLATION" section, to install GroupShield for
Exchange on all the nodes of the cluster.

Use the following task to configure the Cluster
Replication in GroupShield for Exchange for
‘Quarantine Database’:

1.  From the Start menu, click Programs | McAfee |
    GroupShield for Exchange | Cluster Replication
    Setup.

2.  Select the GroupShield for Exchange Server name
    from "Server name" drop down, to retrieve the
    available servers for replication.

3.  Select the server from ‘Available server(s)’
    list and click ">>" to add it to the
    ‘Replication server(s)’ list.

4.  Click ‘Apply’ to save the changes.


To manage the Cluster Replication in GroupShield for
Exchange:

1.  Select ‘Start Replication service for:’ to
    enable the available option for replication.

2.  Select the following option(s) you want to
    configure:

   -   Policy Configuration

   -   Engine/DATs

   -   Quarantine Database

3.  Click ‘Apply’ to save the changes.

4.  A message ‘Please wait until the replication
    service is started’ appears.

    NOTE:
    You must restart the GroupShield for Exchange
    service, for the Quarantine Database replication
    to work. After selecting this option from the
    cluster replication setup utility, a message
    will prompt you to restart the GroupShield for
    Exchange service.


CLUSTER UNINSTALLATION

1.  From the Start menu, click Programs | McAfee |
    GroupShield for Exchange | Cluster Replication
    Setup.

2.  Select the GroupShield for Exchange Server name
    from "Server name" drop down.

3.  Remove the server listed under ‘Replication
    server(s)’ using ‘<<’ option.

4.  Select "Stop Replication service", and then
    click Apply.

5.  Repeat the steps mentioned in REMOVING THIS
    INSTALLATION section on all the nodes of the
    cluster.

    NOTE:
    Repeat steps (2) and (3) to remove ‘Replication
    server(s)’ for all the available Servers.


INSTALLATION USING EPOLICY ORCHESTRATOR VERSION 4.0

    Assumptions:
    System 1: ePolicy Orchestrator version 4.0 is
    installed and configured on a supported
    operating system.

    System 2: Exchange Server 2010 (Mailbox, Hub,
    Edge and Mailbox + Hub) is installed and
    configured.

    From ePolicy Orchestrator server console,
    ePolicy Orchestrator agent is installed or
    pushed on the exchange server.

1.  Using an administrator account, log on to the
    ePolicy Orchestrator server.

2.  Create a temporary directory on the network or
    your local drive.

3.  To install, do one of the following depending on
    how you obtained the software:

   -   Insert the CD into the computer’s drive and
       copy the installation files into the
       temporary directory you created.

   -   Download the .ZIP archive and extract the
       file to the temporary directory.

4.  Load ePolicy Orchestrator. Log in to the ePolicy
    Orchestrator server console using the admin
    account.

5.  Click Software | Check In Package. The Package
    page appears.

6.  Choose the Package type as Product or Update
    (.ZIP) and browse in File path to locate
    GROUPSHIELD.ZIP saved in a temporary folder.

7.  Click Next. The Package Options page appears
    with the Package info.

8.  Choose a Branch.

9.  In Options, select the required option(s), then
    click Save.

10. To install GroupShield on the client computer,
    click Systems | System Tree | Client Tasks | New
    Task.

11. Type a Name, Notes for the task and choose the
    Type as Product Deployment (McAfee Agent).

12. Click Next. The Client Task Builder page
    appears.

13. Under Description, select the Target Platforms.

14. In Products to deploy, select GroupShield for
    Exchange 7.0 from the drop-down and choose the
    Action as Install.

    NOTE:
    You can also specify command-line arguments to
    custom install GroupShield 7.0.2 for Exchange on
    the client computer without the default values.
    Separate multiple parameters with a space.

    For example:
       INSTALLDIR="C:\GSE702" ADDLOCAL="ServerProtection,StandaloneUI,WebUI"
       NEED_DESKTOP_SHORTCUT=1

    You can use:

       INSTALLDIR – To install GroupShield 7.0.2 for
       Exchange in the specified folder location.

       ADDLOCAL – To install the GroupShield 7.0.2
       for Exchange Web user interface and/or
       stand-alone user interface.

       NEED_DESKTOP_SHORTCUT – To create a
       GroupShield 7.0.2 for Exchange desktop
       shortcut item.

15. In Options, select or deselect "Run at every
    policy enforcement (Windows only)".

16. Click Next to schedule this task as desired.

17. Click Next to view a summary of the task.

18. Click Save and send an agent wake-up call.

19. Click Configuration | Extensions.

20. Remove the already installed "GroupShield for
    Exchange Reports 7.0/7.0.1" extension from
    ePolicy Orchestrator 4.0.

21. Remove the already installed "GroupShield for
    Exchange 7.0/7.0.1" extension from ePolicy
    Orchestrator 4.0.

    NOTE:
   -   You can also use the GroupShield 7.0.1 for
       Exchange extension to manage GroupShield
       7.0.2 for Exchange computers.

   -   The "Enable routing to the user junk folders
       on this server" option is no longer available
       in GroupShield 7.0.2 for Exchange extension.
       This is because, email routing to user's
       "Junk E-mail" folder now occurs on a Hub
       server role. If you want to use this option
       in the earlier versions of GroupShield, use
       the GroupShield 7.0.1 for Exchange
       extension.

22. To install the GroupShield v7.0.2 for Exchange
    policy extension files, click Configuration |
    Extensions| Install Extension. The Install
    Extension dialog box appears.

23. Click Browse, select the extension files
    GROUPSHD7000_0409.ZIP and click OK.

24. To install the GroupShield report extension
    files, click Configuration | Extension. The
    Extension dialog box appears.

25. Check in "GSE7REPORTS.ZIP" that is extracted
    from the Service Pack 2 package.

26. From the Services console, restart the "McAfee
    ePolicy Orchestrator 4.0 EventParser" service on
    the client computer.


INSTALLATION USING EPOLICY ORCHESTRATOR VERSION 4.5

    Assumptions:
    System 1: ePolicy Orchestrator version 4.5 is
    installed and configured on a supported
    operating system.

    System 2: Exchange Server 2010 (MailBox, Hub,
    Edge and MailBox + Hub) is installed and
    configured.

    From ePolicy Orchestrator server console,
    ePolicy Orchestrator agent is installed or
    pushed on the exchange server.

1.  Using an administrator account, log on to the
    ePolicy Orchestrator server.

2.  Create a temporary directory on the network or
    your local drive.

3.  To install, do one of the following depending on
    how you obtained the software:

   -   Insert the CD into the computer’s drive and
       copy the installation files into the
       temporary directory you created.

   -   Download the .ZIP archive and extract the
       file to the temporary directory.

4.  Load ePolicy Orchestrator. Log in to the ePolicy
    Orchestrator server console using the admin
    account.

5.  Click Menu | Software | Master Repository. The
    "Packages in Master Repository" page appears.

6.  Click Actions | Check In Package. The Check In
    Package page appears.

7.  Choose the Package type as Product or Update
    (.ZIP) and browse in File path to locate
    GROUPSHIELD.ZIP saved in a temporary folder.

8.  Click Next. The Package Options page appears
    with the Package info.

9.  Choose a Branch.

10. In Options, select the required option(s), then
    click Save. The "Packages in Master Repository"
    page appears.

11. To install GroupShield on the client computer,
    click Menu | Systems | System Tree.

12. Click Client Tasks | New Task. The "Client Task
    Builder" page appears.

13. Type a Name, Notes for the task, choose the Type
    as Product Deployment, and select Tags.

14. Click Next. The Configuration page appears.

15. Select the Target Platforms.

16. In Products and components, select GroupShield
    for Exchange 7.0.<build>.<package> from the
    drop-down, choose the Action as Install,
    language and the branch.

    NOTE:
    You can also specify command-line arguments to
    custom install GroupShield 7.0.2 for Exchange on
    the client computer without the default values.
    Separate multiple parameters with a space.

    For example:
       INSTALLDIR="C:\GSE702" ADDLOCAL="ServerProtection,StandaloneUI,WebUI"
       NEED_DESKTOP_SHORTCUT=1

    You can use:

       INSTALLDIR – To install GroupShield 7.0.2 for
       Exchange in the specified folder location.

       ADDLOCAL – To install the GroupShield 7.0.2
       for Exchange Web user interface and/or
       stand-alone user interface.

       NEED_DESKTOP_SHORTCUT – To create a
       GroupShield 7.0.2 for Exchange desktop
       shortcut item.

17. In Options, select or deselect "Run at every
    policy enforcement (Windows only)".

18. Click Next to schedule this task as desired.

19. Click Next to view a summary of the task.

20. Click Save and send an agent wake-up call.

21. Click Menu | Software| Extensions.

22. Remove the already installed "GroupShield for
    Exchange Reports 7.0/7.0.1" extension from
    ePolicy Orchestrator 4.5.

23. Remove the already installed "GroupShield for
    Exchange 7.0/7.0.1" extension from ePolicy
    Orchestrator 4.5.

    NOTE:
   -   You can also use the GroupShield 7.0.1 for
       Exchange extension to manage GroupShield
       7.0.2 for Exchange computers.

   -   The "Enable routing to the user junk folders
       on this server" option is no longer available
       in GroupShield 7.0.2 for Exchange extension.
       This is because, email routing to user's
       "Junk E-mail" folder now occurs on a Hub
       server role. If you want to use this option
       in the earlier versions of GroupShield, use
       the GroupShield 7.0.1 for Exchange
       extension.

24. To install the GroupShield policy extension
    files, click Menu| Software | Extensions |
    Install Extensions. The Install Extension dialog
    box appears.

25. Click Browse, select the extension files
    GROUPSHD7000_0409.ZIP and click OK.

26. To install the GroupShield report extension
    files, click Menu| Software | Extensions. The
    Extension dialog box appears.

27. Check in "GSE7REPORTS.ZIP" that is extracted
    from the Service Pack 2 package.

28. From the Services console, restart the "McAfee
    ePolicy Orchestrator 4.5.0 EventParser" service
    on the client computer.


POLICY MIGRATION FROM GROUPSHIELD FOR EXCHANGE
7.0/7.0.1 TO 7.0.2 ON EPOLICY ORCHESTRATOR 4.0

1.  Before upgrading to GroupShield for Exchange
    7.0.2, export the "GroupShield for Exchange
    7.0/7.0.1" policies.

2.  Log on to ePolicy Orchestrator 4.0, click Policy
    Catalog under the Systems tab, and select
    "GroupShield for Exchange 7.0" against the
    Product field.

3.  Click EXPORT on the Policy Catalog page, then
    right-click "GROUPSHD7000 Policies" and click
    "Save Target As".

4.  Save the GROUPSHD7000_POLICIES.XML file on to a
    temporary location.

5.  Click the Configuration tab, then the Extensions
    tab and remove the already installed
    "GroupShield for Exchange 7.0" extension.

6.  Check-in "GROUPSHD7000_0409.ZIP" that is
    extracted from the Service Pack 2 package.

7.  To import "GROUPSHD7000_POLICIES.XML" from the
    temporary location, click "Policy Catalog" under
    the Systems tab, and select "GroupShield for
    Exchange 7.0" against the Product field.

8.  Click IMPORT on the Policy Catalog page, and
    then browse to the temporary location where you
    saved GROUPSHD7000_POLICIES.XML and click OK.

9.  Select all the policies that need to be
    imported, and then click OK.

POLICY MIGRATION FROM GROUPSHIELD FOR EXCHANGE
7.0/7.0.1 TO 7.0.2 ON EPOLICY ORCHESTRATOR 4.5

1.  Before upgrading to GroupShield for Exchange
    7.0.2, export the "GroupShield for Exchange
    7.0/7.0.1" policies.

2.  Log on to ePolicy Orchestrator 4.5, click Menu |
    Policy | Policy Catalog, and select "GroupShield
    for Exchange 7.0" against the Product field.

3.  Click EXPORT on the Policy Catalog page, select
    the Category, then right-click "GROUPSHD7000
    Policies" and click "Save Target As".

4.  Save the GROUPSHD7000_POLICIES.XML file on to a
    temporary location.

5.  Click Menu | Software | Extensions and remove
    the already installed "GroupShield for Exchange
    7.0" extension.

6.  Check-in "GROUPSHD7000_0409.ZIP" that is
    extracted from the Service Pack 2 package.

7.  To import "GROUPSHD7000_POLICIES.XML" from the
    temporary location, click Menu | Policy | Policy
    Catalog, and select "GroupShield for Exchange
    7.0" against the Product field.

8.  Click IMPORT on the Policy Catalog page, and
    then browse to the temporary location where you
    saved GROUPSHD7000_POLICIES.XML and click OK.

9.  Select all the policies that need to be
    imported, and then click OK.


TESTING YOUR INSTALLATION

You can test the operation of the software by
running the EICAR Standard anti-virus test file on
any computer where you have installed the software.
The EICAR Standard AntiVirus Test File is a combined
effort by anti-virus vendors throughout the world to
implement one standard by which customers can verify
their anti-virus installations.

To test your installation:

1.  Copy the following line into its own file,
    making sure you do not include any spaces or
    line breaks. Save the file with the name
    EICAR.COM.

       X5O!P%@AP[4\PZX54(P^)7CC)7}$EICAR-STANDARD-ANTIVIRUS-TEST-FILE!$H+H*

    The file size will be 68 or 70 bytes.

2.  Make sure GroupShield for Exchange service is up
    and running. Send a mail using your mail client
    with Eicar.Com as an attachment.

    Check the mail in the recipient’s mailbox. The
    mail will contain a file warning.txt attached
    which replaces the sample virus file Eicar.Com.
    This action is as per the default settings of
    the product.

    IMPORTANT:
    Please note that this file Eicar.Com is NOT A
    VIRUS. For more information on the EICAR test
    file, visit:

       http://www.eicar.org


QUARANTINING USING MCAFEE QUARANTINE MANAGER

1.  Install GroupShield for Exchange on <Server 1>.

2.  Install McAfee Quarantine Manager v6.0 on
    <Server 2>.

3.  On the GroupShield computer, launch the product
    user interface.

4.  Click Settings & Diagnostics | Detected Items.
    The Detected Items page appears.

5.  Under McAfee Quarantine Manager, select
    Enabled.

6.  Type the IP Address of the <Server> where you
    have installed McAfee Quarantine Manager.

7.  Use the default values for Port and Callback
    port or modify them as configured on the McAfee
    Quarantine Manager server.

8.  Click Apply.

    NOTE:
    Once you have completed the above setup,
    GroupShield starts quarantining the detected
    items on McAfee Quarantine Manager Server.
    However, it also logs them in the local
    database.

    You cannot release quarantined items that are
    detected by the GroupShield’s anti-virus
    scanner.

    To disable quarantining using McAfee Quarantine
    Manager, from the GroupShield dashboard, click
    Settings & Diagnostics | Detected Items.
    Deselect Enabled and click Apply. This makes
    GroupShield to continue quarantining in the
    local database.


REMOVING THIS INSTALLATION

1.  Click Start | Settings | Control Panel | Add or
    Remove Programs.

2.  Select McAfee GroupShield for Exchange, then
    click Remove.

__________________________________________________________
RESOLVED ISSUES

This Service Pack resolves the following issues:

1.  EventParser service stops responding while
    processing events.

    Reference ID: 433723

2.  In the "Settings & Diagnostics | Diagnostics"
    page, changes to the "Event Logging" settings
    are not saved.

    Reference ID: 454269

3.  If you enable Digest mail in the registry for
    GroupShield, "Microsoft Exchange Information
    Store" stops responding once the AutoUpdate is
    complete.

    Reference ID: 452546

4.  File filtering feature does not work, if the
    attachment's file name is long and contains
    blank spaces.

    Reference ID: 453512

5.  Email released from the quarantined database is
    in ".EML" format, instead of ".MSG" format.

    Emails sent to 'CC' and/or 'BCC' and
    quarantined, when released to user will go as
    'TO' instead of 'CC' and/or 'BCC'.

    Downloaded emails from quarantined database are
    not in readable format.

    Released emails from quarantined database are
    not the same as original email.

    NOTE:
    To release the quarantine mail in ".MSG" format,
    set the "ReleaseMailAsEml" registry key value
    set to ‘0’.

    Reference ID: 464198

6.  The "UpdateFrequency" and "ConnectionPoolSize"
    registry key values are different in "Stats" and
    "gsStats" key of the "GroupShield for Exchange"
    key.

    Reference ID: 478550

7.  GroupShield for Exchange fails to quarantine
    infected emails, on Microsoft Windows 2008
    Server.

    Reference ID: 474504

8.  GSCommon.dll exception occurs while fetching
    virtual server name. This is caused by usage of
    un-initialized variables.

    Reference ID: 480870

9.  High "RPC Averaged Latency" was observed when
    "Postgres" process takes more time to complete
    the I/O operations. As a result the GroupShield
    reporting threads wait longer, increasing the
    RPC latency and delays the processing of email
    messages.

    Reference ID: 488686

10. RPCSERV.EXE exception was observed, during alert
    replacement for TNEF (Transport Neutral
    Encapsulation Format) email. This is due to heap
    corruption in the TNEF Parser plugin.

    Reference ID: 476761

11. When a policy was enforced using ePolicy
    Orchestrator, an Update policy scheduled on the
    GroupShield server was overwritten.

    Reference ID: 495934

12. Email messages are not scanned when:

   -   The email address is specified in the "CC" or
       "BCC" field

    (AND)

   -   The "DigestMail" DWORD value is set to "1" in
       the registry editor under:

       HKLM\Software\McAfee\GroupShield for
       Exchange\ADUserCache\

    Reference ID: 503826

13. GroupShield events were not parsed on the
    ePolicy Orchestrator 4.0 server. Due to this the
    GroupShield reports were not generated in
    ePolicy Orchestrator.

    Reference ID: 512163

14. Unable to optimize the "gse_store_stats" table
    in the GroupShield for Exchange database.

    Reference ID: 511043

15. GroupShield reports extension does not update
    events 1750-1760 in the event table.

    Reference ID: 506246

16. When GroupShield’s Mail size filtering option is
    set to "Remove all attachments", GroupShield
    deletes the email instead of deleting the
    attachments.

    Reference ID: 523914

17. Unable to change the action for File Filtering
    rule, when GroupShield's Web user interface is
    accessed using Internet Explorer 8.0.

    Reference ID: 497026

__________________________________________________________
KNOWN ISSUES

1.  When GroupShield v7.0.2 for Exchange was
    deployed using ePolicy Orchestrator, on-demand
    scan failed to scan the mailbox.

    The following event was logged in the Event
    Viewer:

       Microsoft.Exchange.Configuration.Tasks.ManagementObjectNotFoundException: User or
       group "%USERDNSDOMAIN%\GSOD_<ComputerName>" wasn't found. Please make sure you've
       typed it correctly.

    WORKAROUND:
    Perform the following task on all the
    GroupShield servers (MailBox role):

   a.  From the command prompt, navigate to the
       C:\Program Files(x86)\McAfee\GroupShield for
       Exchange\bin folder.

   b.  Execute the following command:

       ConfigureX64.exe CreateODUser

   c.  This creates a GroupShield user
       (GSOD_<ComputerName>) in the Active Directory
       users. This user will be displayed in the
       Exchange Management Console | Recipient
       Configuration | Mailbox, whenever the next
       on-demand scan is scheduled.

    Reference ID: 533556

2.  When the SCL Junk threshold" value of the
    exchange server was modified, Junk E-mail
    routing feature worked only after eight hours.

    WORKAROUND:
    From the Services console, restart the
    GroupShield for Exchange service.

    Reference ID: 522315

3.  In On-demand Scan, when a cleaned virus message
    size was greater than 10MB, the "delete message"
    action was taken instead of updating the cleaned
    virus in the message. This was due to the
    default settings limitation set in the Microsoft
    Exchange Client Access Server’s "WEB.CONFIG"
    file, to 10MB.

    WORKAROUND:
    In the WEB.CONFIG file, modify the following
    values in all the CAS servers to the required
    size:

   -   maxAllowedContentLength
   -   EWSHttpsBinding | maxReceivedMessageSize
   -   EWSWSSecurityBinding | maxReceivedMessageSize

    Default Path:

       C:\Program Files\Microsoft\Exchange
       Server\V14\ClientAccess\ExchWeb\ews\web.config

    Reference ID: 526180

4.  GroupShield v7.0.2 for Exchange performance
    counters were not listed in the Performance MMC
    (perfmon.exe).

    WORKAROUND:

   a.  From the Services console, start the
       following services:

       -   Performance Counter DLL Host
       -   Performance Logs & Alerts

   b.  Go to the directory "C:\Windows\SysWOW64\"
       and double-click "perfmon.exe".

   c.  Create a "Data Collector Set" for GroupShield
       and other performance counters.

    Reference ID: 524679

5.  In Outlook 2007, emails that were downloaded and
    saved from the quarantine database could not be
    viewed.

    WORKAROUND:
    Use any compression utility such as WinZip or
    WinRAR to open the file.

    Reference ID: 522860

6.  Replication of DATs/Engine/Config on the Mailbox
    servers failed, when the GroupShield for
    Exchange service was stopped on any of the
    Mailbox server.

    WORKAROUND:
    From the Services console, start the
    "GroupShield for Exchange service" on the
    Mailbox server.

    Reference ID: 527032

7.  Anti-spam rules update fails, if the update
    request goes through a proxy server.

    WORKAROUND:

   a.  Click "Start | Run" and type "REGEDIT". The
       "Registry Editor" window appears.

   b.  Create the registry keys "ProxyAddress" and
       "ProxyUserAccountDetails" in the following
       path:

       HKEY_LOCAL_MACHINE\Software\Wow6432Node\McAfee\GroupShield for
       Exchange\SystemState\

   c.  For the "ProxyAddress" registry key, add the
       "Value data" in the following format:

       <Proxy Server IPAddress>:<Proxy Server Port>

       Example:
       192.168.215.100:8080

   d.  For the "ProxyUserAccountDetails" registry
       key, add the "Value data" in the following
       format:

       <User name>:<Password>

       Example:
       Administrator:Password123

    Reference ID: 450161

To view a list of additional "Known Issues" not
included in the release of GroupShield 7.0.2 for
Microsoft Exchange release notes, visit:

       https://kc.mcafee.com/corporate/index?page=content&id=KB67791

    (KnowledgeBase article: KB67791)

__________________________________________________________
DOCUMENTATION

This product includes the following documentation
set:

   -  Release Notes (This ReadMe file)

   -  Online Help
      High-level and detailed information accessed
      from the software application: Help menu
      and/or Help button for page-level help;
      right-click option for What’s This? help.

   -  User Guide & Addendum
      System requirements and instructions for
      installing and starting the software.
      Introduction to the product and its features;
      detailed instructions for configuring the
      software; information on deployment, recurring
      tasks, and operating procedures.

__________________________________________________________
CONTACT INFORMATION

SECURITY HEADQUARTERS: MCAFEE LABS

    Home Page
       http://www.mcafeesecurity.com/us/security/home.asp

    Virus Information Library
       http://vil.mcafeesecurity.com/

    McAfee Labs WebImmune & Submit a Virus Sample
    (Logon credentials required)
       https://www.webimmune.net/default.asp

    McAfee Labs Notification Service
       http://vil.mcafeesecurity.com/vil/signup_DAT_notification.aspx

DOWNLOAD SITE
    Home Page
       http://www.mcafeesecurity.com/us/downloads/

    Anti-Virus DAT File and Engine Updates
       http://www.mcafee.com/apps/downloads/security_updates/dat.asp

       ftp://ftp.mcafee.com/pub/antivirus/datfiles/4.x

    Anti-Spam Rules File and Engine Updates
       ftp://ftp.mcafee.com/spamdefs/1.x/

    Product Upgrades
       https://secure.nai.com/us/forms/downloads/upgrades/login.asp

       Valid grant number required (contact Customer
       Service)

    HotFix and Patch Releases
   -   For Security Vulnerabilities (Available to
       the public)
       http://www.mcafeesecurity.com/us/downloads/updates/hotfixes.asp
   -   For Products (ServicePortal account and
       McAfee Technical Support grant number
       required)
       https://mysupport.mcafee.com/products/products.asp

    Product End-of-Life Support
       http://www.mcafeesecurity.com/us/products/mcafee/end_of_life.htm


SOFTWARE AND HARDWARE TECHNICAL SUPPORT
    Home Page
       http://www.mcafeesecurity.com/us/support/technical_support

    KnowledgeBase Search
       http://knowledgemap.nai.com/

    McAfee Technical Support ServicePortal (Logon
    credentials required)
       https://mysupport.mcafee.com/Eservice/Default.aspx

    McAfee Security Alerting Service (MSAS)
       http://mysupport.mcafee.com/supportinfo/pvans_info.asp


CUSTOMER SERVICE
    US, Canada, and Latin America toll-free:
   Phone:     +1-888-VIRUS NO or +1-888-847-8766
              Monday-Friday, 8am-8pm, Central Time

   E-mail:
   https://secure.nai.com/apps/support/customer_service/request_form.asp

   Web:
   http://www.mcafeesecurity.com/us/support/default.asp


MCAFEE BETA PROGRAM
    Download Site:
       http://www.mcafeesecurity.com/us/downloads/beta/mcafeebetahome.htm

    E-mail to Submit Beta Feedback:
       GroupShield_Exchange_Beta@mcafee.com


TRAINING: MCAFEE UNIVERSITY
       http://www.mcafee.com/us/enterprise/services/education


WORLDWIDE OFFICES
    For addresses and phone numbers of worldwide
    offices:

       http://www.mcafeesecurity.com/us/contact/home.htm

_____________________________________________________
COPYRIGHT AND TRADEMARK ATTRIBUTIONS

Copyright (C) 2009 McAfee, Inc. All Rights Reserved.
No part of this publication may be reproduced,
transmitted, transcribed, stored in a retrieval
system, or translated into any language in any form
or by any means without the written permission of
McAfee, Inc., or its suppliers or affiliate
companies.


TRADEMARKS

ACTIVE FIREWALL, ACTIVE SECURITY, ACTIVESECURITY
(AND IN KATAKANA), ACTIVESHIELD, CLEAN-UP, DESIGN
(STYLIZED E), DESIGN (STYLIZED N), ENTERCEPT,
EPOLICY ORCHESTRATOR, FIRST AID, FOUNDSTONE,
GROUPSHIELD, GROUPSHIELD (AND IN KATAKANA),
INTRUSHIELD, INTRUSION PREVENTION THROUGH
INNOVATION, MCAFEE, MCAFEE (AND IN KATAKANA), MCAFEE
AND DESIGN, MCAFEE.COM, MCAFEE VIRUSSCAN, NET TOOLS,
NET TOOLS (AND IN KATAKANA), NETSCAN, NETSHIELD,
NUTS & BOLTS, OIL CHANGE, PRIMESUPPORT, THREATSCAN,
TOTAL VIRUS DEFENSE, VIREX, VIRUS FORUM, VIRUSCAN,
VIRUSSCAN, VIRUSSCAN (AND IN KATAKANA), WEBSCAN,
WEBSHIELD, WEBSHIELD (AND IN KATAKANA) are
registered trademarks or trademarks of McAfee, Inc.
and/or its affiliates in the US and/or other
countries. The color red in connection with security
is distinctive of McAfee brand products. All other
registered and unregistered trademarks herein are
the sole property of their respective owners.

_____________________________________________________
LICENSE INFORMATION


LICENSE AGREEMENT

NOTICE TO ALL USERS: CAREFULLY READ THE APPROPRIATE
LEGAL AGREEMENT CORRESPONDING TO THE LICENSE YOU
PURCHASED, WHICH SETS FORTH THE GENERAL TERMS AND
CONDITIONS FOR THE USE OF THE LICENSED SOFTWARE. IF
YOU DO NOT KNOW WHICH TYPE OF LICENSE YOU HAVE
ACQUIRED, PLEASE CONSULT THE SALES AND OTHER RELATED
LICENSE GRANT OR PURCHASE ORDER DOCUMENTS THAT
ACCOMPANIES YOUR SOFTWARE PACKAGING OR THAT YOU HAVE
RECEIVED SEPARATELY AS PART OF THE PURCHASE (AS A
BOOKLET, A FILE ON THE PRODUCT CD, OR A FILE
AVAILABLE ON THE WEB SITE FROM WHICH YOU DOWNLOADED
THE SOFTWARE PACKAGE). IF YOU DO NOT AGREE TO ALL OF
THE TERMS SET FORTH IN THE AGREEMENT, DO NOT INSTALL
THE SOFTWARE. IF APPLICABLE, YOU MAY RETURN THE
PRODUCT TO MCAFEE OR THE PLACE OF PURCHASE FOR A
FULL REFUND.


LICENSE ATTRIBUTIONS

This product includes or may include:
* Software developed by the OpenSSL Project for use
in the OpenSSL Toolkit (http://www.openssl.org/).
* Cryptographic software written by Eric A. Young
and software written by Tim J. Hudson. * Some
software programs that are licensed (or sublicensed)
to the user under the GNU General Public License
(GPL) or other similar Free Software licenses which,
among other rights, permit the user to copy, modify
and redistribute certain programs, or portions
thereof, and have access to the source code. The GPL
requires that for any software covered under the
GPL, which is distributed to someone in an
executable binary format, that the source code also
be made available to those users. For any such
software covered under the GPL, the source code is
made available on this CD. If any Free Software
licenses require that McAfee provide rights to use,
copy or modify a software program that are broader
than the rights granted in this agreement, then such
rights shall take precedence over the rights and
restrictions herein. * Software originally written
by Henry Spencer, Copyright 1992, 1993, 1994, 1997
Henry Spencer. * Software originally written by
Robert Nordier, Copyright (C) 1996-7 Robert Nordier.
* Software written by Douglas W. Sauder. * Software
developed by the Apache Software Foundation
(http://www.apache.org/). A copy of the license
agreement for this software can be found at
www.apache.org/licenses/LICENSE-2.0.txt.
* International Components for Unicode ("ICU")
Copyright (C) 1995-2002 International Business
Machines Corporation and others. * Software
developed by CrystalClear Software, Inc., Copyright
(C) 2000 CrystalClear Software, Inc. * FEAD(R)
Optimizer(R) technology, Copyright Netopsystems AG,
Berlin, Germany. * Outside In(R) Viewer Technology
(C) 1992-2001 Stellent Chicago, Inc. and/or Outside
In(R) HTML Export, (C) 2001 Stellent Chicago, Inc.
* Software copyrighted by Thai Open Source Software
Center Ltd. and Clark Cooper, (C) 1998, 1999, 2000.
* Software copyrighted by Expat maintainers.
* Software copyrighted by The Regents of the
University of California, (C) 1996, 1989, 1998-2000.
* Software copyrighted by Gunnar Ritter. * Software
copyrighted by Sun Microsystems, Inc., 4150 Network
Circle, Santa Clara, California 95054, U.S.A., (C)
2003. * Software copyrighted by Gisle Aas. (C)
1995-2003. * Software copyrighted by Michael A.
Chase, (C) 1999-2000. * Software copyrighted by Neil
Winton, (C) 1995-1996. * Software copyrighted by RSA
Data Security, Inc., (C) 1990-1992. * Software
copyrighted by Sean M. Burke, (C) 1999, 2000.
* Software copyrighted by Martijn Koster, (C) 1995.
* Software copyrighted by Brad Appleton, (C)
1996-1999.  * Software copyrighted by Michael G.
Schwern, (C) 2001. * Software copyrighted by Graham
Barr, (C) 1998. * Software copyrighted by Larry Wall
and Clark Cooper, (C) 1998-2000. * Software
copyrighted by Frodo Looijaard, (C) 1997. * Software
copyrighted by the Python Software Foundation,
Copyright (C) 2001, 2002, 2003. A copy of the
license agreement for this software can be found at
www.python.org. * Software copyrighted by Beman
Dawes, (C) 1994-1999, 2002. * Software written by
Andrew Lumsdaine, Lie-Quan Lee, Jeremy G. Siek (C)
1997-2000 University of Notre Dame. * Software
copyrighted by Simone Bordet & Marco Cravero, (C)
2002. * Software copyrighted by Stephen Purcell, (C)
2001. * Software developed by the Indiana University
Extreme! Lab (http://www.extreme.indiana.edu/).
* Software copyrighted by International Business
Machines Corporation and others, (C) 1995-2003.
* Software developed by the University of
California, Berkeley and its contributors.
* Software developed by Ralf S. Engelschall
<rse@engelschall.com> for use in the mod_ssl project
(http:// www.modssl.org/). * Software copyrighted by
Kevlin Henney, (C) 2000-2002. * Software copyrighted
by Peter Dimov and Multi Media Ltd. (C) 2001, 2002.
* Software copyrighted by David Abrahams, (C) 2001,
2002. See http://www.boost.org/libs/bind/bind.html
for documentation. * Software copyrighted by Steve
Cleary, Beman Dawes, Howard Hinnant & John Maddock,
(C) 2000. * Software copyrighted by Boost.org, (C)
1999-2002. * Software copyrighted by Nicolai M.
Josuttis, (C) 1999. * Software copyrighted by Jeremy
Siek, (C) 1999-2001. * Software copyrighted by
Daryle Walker, (C) 2001. * Software copyrighted by
Chuck Allison and Jeremy Siek, (C) 2001, 2002.
* Software copyrighted by Samuel Krempp, (C) 2001.
See http://www.boost.org for updates, documentation,
and revision history. * Software copyrighted by Doug
Gregor (gregod@cs.rpi.edu), (C) 2001, 2002.
* Software copyrighted by Cadenza New Zealand Ltd.,
(C) 2000. * Software copyrighted by Jens Maurer,
(C) 2000, 2001. * Software copyrighted by Jaakko
Järvi (jaakko.jarvi@cs.utu.fi), (C) 1999, 2000.
* Software copyrighted by Ronald Garcia, (C) 2002.
* Software copyrighted by David Abrahams, Jeremy
Siek, and Daryle Walker, (C) 1999-2001. * Software
copyrighted by Stephen Cleary (shammah@voyager.net),
(C) 2000. * Software copyrighted by Housemarque Oy
<http://www.housemarque.com>, (C) 2001. * Software
copyrighted by Paul Moore, (C) 1999. * Software
copyrighted by Dr. John Maddock, (C) 1998-2002.
* Software copyrighted by Greg Colvin and Beman
Dawes, (C) 1998, 1999. * Software copyrighted by
Peter Dimov, (C) 2001, 2002. * Software copyrighted
by Jeremy Siek and John R. Bandela, (C) 2001.
* Software copyrighted by Joerg Walter and Mathias
Koch, (C) 2000-2002. * Software copyrighted by
Carnegie Mellon University (C) 1989, 1991, 1992.
* Software copyrighted by Cambridge Broadband Ltd.,
(C) 2001-2003. * Software copyrighted by Sparta,
Inc., (C) 2003-2004. * Software copyrighted by
Cisco, Inc and Information Network Center of Beijing
University of Posts and Telecommunications, (C)
2004. * Lotus C++ API Toolkit for Notes/Domino
Runtime Modules (c) Copyright IBM Corporation 2004
All Rights Reserved * Software copyrighted by Simon
Josefsson, (C) 2003. * Software copyrighted by
Thomas Jacob, (C) 2003-2004. * Software copyrighted
by Advanced Software Engineering Limited, (C) 2004.
* Software copyrighted by Todd C. Miller, (C) 1998.
* Software copyrighted by The Regents of the
University of California, (C) 1990, 1993, with code
derived from software contributed to Berkeley by
Chris Torek.


DBN-001-EN

V3.1.3

